- For preparation prior to wet room tanking
- For interior use
- Ideal moisture barrier
- For priming of absorbent surfaces
- Quick drying
- Approved for wet rooms
Products
-
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix less dustFlexible dust reduced tile adhesive - Light
-
LetFixFlexible tile adhesive - Light
-
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
Montagelim1-component all-round mounting adhesive
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
Sealing Primer
Product information
Product
Polymer dispersion added pink tracer
Coverage
**Substrate** | **Coverage undiluted Primer, litre/m²** |
Absorbent surfaces, such as render, brickwork, concrete, light-weight concrete | Approx 0,10 |
Paperfaced plasterboards, fibre-reinforced plasterboards | Approx 0,20 |
Gypsum plaster, plywood 2 applications | Approx 0,20 |
Packaging
Available in 1, 2½ and 10 litres plastic container.
Precautions
1073 |
Alfix A/S H.C. Ørsteds Vej 11-13 DK-6000 Kolding alfix.com 10 1073-CPR-314-1 1073-CPR-314-2 14 1073-CPR-314-3 EAD 030352-00-0503 EAD 030436-00-0503 |
Alfix Primer ETA-09/0047 ETA-09/0048 ETA-11/0501 Declaration of performance No. 19 |
Tests
Danish SBI
Technical data
- Working temperature
- Min +12°C
- Density
- 1.2 kg/litre
- Drying time
- 1 hour at +20°C
- Shelf life
- Min. 12 months in unopened container. Keep protected from frost.
Tanking
Areas subjected to frequent or high water exposure, so-called wet zones, require subsequent waterproofing with a sealing membrane: Alfix 1K Sealing Membrane or Alfix 2K Sealing Membrane
Application
Surfaces
Moisture-insensitive surfaces:
Cement/sand rendering, 2 days.
Concrete, older than 28 days, max 90% relative humidity.
Light-weight concrete, max. moisture content 8%
Aerated concrete, brickwork, plasterboards.
Screed, older than 14 days, max 90% relative humidity.
Moisture-sensitive substrates:
Plasterboard, fiber gypsum board.
Plywood on floors, moisture content 7 - 12%.
Flooring containing cement-based levelling compound.
Gypsum plaster and anhydrite floors, max. moisture content 1%.
How to use
The surface should be dimensionally stable, sound, and clean. Free from laitance, grease, and dust. There should be no blooms or crack formations. Residues from grease or soap can be removed with Alfix Deep Cleaner.
Apply Alfix Primer to the surface with large brush or roller to full coverage.
Rendering, brickwork, concrete, light-weight concrete, aerated concrete, and cement-based levelling compounds should be primed with Primer diluted with water 1:1.
Plywood, gypsum plaster, and anhydrite floors should be primed with 2 applications. Apply first coat diluted with water 1:3, apply second coat undiluted.
Paperfaced plasterboards and fibre-reinforced plasterboards should be primed undiluted to full coverage.
If boards are foil-backed, apply only 1 coat of primer diluted 1:3 with water. Foil-backing eliminates any further need for a waterproof membrane.
Cleaning
Clean residues from tools with water before the primer sets. Once dried, primer can be removed mechanically or with solvent.
Wear protective gloves during work since the product tends to stick to the skin.
Downloads