- For all types of ceramic tiles, quarry tiles and mosaics
- For sensitive natural stone, such as marble
- For interior use in dry and wet locations
- Joint widths from 2 mm to 8 mm
- Prevents discolouration and efflorescence
- Water and dirt repellent
- Fast track cleaning off the surface
- Foot traffic after 3 hours
- Ensures good filling properties
- Very low emission EC1 plus
Products
-
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix less dustFlexible dust reduced tile adhesive - Light
-
LetFixFlexible tile adhesive - Light
-
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
Montagelim1-component all-round mounting adhesive
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
QuickFuge - Premium 8
Product information
Product
Rapid-setting cement-based powder containing polymer modifiers.
Added lightfast pigments.
Contains quartz sand with grain sizes up to 0.2 mm.
Coverage
0,8 - 1,3 kg per m² depending on tile size and joint width.
Packaging
Available in 5 kg kg PE lined paper bags
Tests
DS/EN 13888
Technical data
- Working temperature
- +5°C - +25°C
- Density
- 2.0 kg/litre (mixed with water)
- Working time
- 30 minutes at +20°C
- Foot traffic
- After 3 hours at +20°C
- Full strength
- After 24 hours at +20°C
- Classification - DS/EN 13888
- CG 2 WA, high class
- Shelf life
- Min. 12 months in unopened bags
General information
By use of conventional tile adhesives, grouting can normally be made 3-48 hours after tile fixing depending on adhesive. Application of Alfix QuickFix premium or Alfix CombiQuickFix tile adhesives make allowance for grouting after only 3-4 hours.
Joints should be clean, dry, and free from loose particles. Joint depth should appear uniform.
On very absorbent tiles, use a slightly damp sponge on the surface before grouting.
Underfloor heating, ventilation, waste heat recovery systems, dehumidifiers, etc should be switched off during tiling. Deactivate all installations 72 hours prior to grouting and reactivate 14 days after completion of work at the earliest. Underfloor heating temperature increase should be by 5°C per 24 hours until preferred surface temperature is obtained.
Inlet temperature should be max. +35°C
Final appearance
Finished joints should be evenly filled and the colour should appear uniform.
The following conditions may affect the natural properties of the cement and cause colour differences:
-
Early cleaning with wet sponge may lighten the colour. This phenomenon is most likely to occur in case of dark colours.
Remedy: Clean off with acidic cleaner, such as Alfix Acid Wash. -
Rapid drying may brighten the colour and produce a weak joint.
Remedy:Keep the surface damp for optimum hydration of the grout. Wet with damp sponge. -
Repairs or visible seams after working breaks may cause colour differences.
Remedy: Remove the joints mechanically and re-grout the area. Wipe over and clean off the tiles several times with slightly damp sponge. -
Moist from substrate and uneven absorption from tile edges may cause a locally darker colour. Remedy:Wash the area several times with a mixture of soap flakes and water.
Colours
Available in white, pale grey, grey, Manhattan steel grey, graphite, anthracite grey, black grey, jura beige.
Colour swatches available on request.
Application
How to use
Add 0.20 – 0.25 litre clean, cold water per kg powder. Pour the powder into a clean container and add the
water while stirring thoroughly with mixing drill. Keep stirring until the consistency is completely uniform, smooth, and lump-free. Allow the mixture to rest for a few minutes before use, and observe a working time of approx. 30 minutes. Please notice that each new mixing requires the use of clean container and mixing tools.
Apply Alfix QuickFuge 8 premium to the surface with a soft rubber squeegee while working diagonally over the joints ensuring that they are completely filled. Remove excess grout immediately while working.
When the grout begins to set, after 20 – 40 minutes, start to slurry off the area using wet sponge frequently rinsed in clean water. Wipe over tiles in broad sweeps until joints appear even and filled. Finally, clean off and finish tiles and joints with only slightly damp sponge.
Any remaining grout film on acid resistant tiles can be removed after 12 - 24 hours using an acidic cleaner, e.g vinegar or Alfix Acid Wash.
NOTE: marble and limestone do not tolerate acidic cleaners!
NB!
This grout contains colour pigments which may initially cause staining to some types of tiles - stains which can be difficult to clean off. Seal absorbent natural stone with Alfix Impregnator to ease successful grouting and subsequent cleaning of tiles. Alfix QuickFuge 8 premium is designed to prevent or reduce the risk of staining but under certain conditions, staining may unfortunately still occur. Hence, for receptive and moisture sensitive stones it is recommendable to trial a small area to ensure that tile and grout are compatible. For further advice, please contact our Technical Services Dept.
Note that the temperature of mixing water will influence setting time.
Protect the joints from heat, draught, and other climatic conditions which will cause premature drying. Do not cover areas just grouted with plastic foil or sheets.
Switch off any underfloor heating.
Cleaning
Grout residues on tiles and tools should be removed with water before the mix begins to set. Cement-based products harden when mixed with water, hence do not pour surplus adhesive into the drain system.
Downloads