- Creates expansion joints in tiled areas
- For wet rooms and sanitary installations
- For indoor and outdoor use
- Fungus and mould resistant
- Does not discolour natural stone
- Suitable for facades
- Joint width from 5 to 15 mm
Products
-
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix less dustFlexible dust reduced tile adhesive - Light
-
LetFixFlexible tile adhesive - Light
-
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
Montagelim1-component all-round mounting adhesive
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
M-Silicon
Product information
Product
High-elastic, one-component sealant on the basis of silicone rubber .
Cures neutrally when exposed to air humidity
Coverage
Packaging
0.30 liter patron.
Unit | Colour | Code No. | DB No. |
0.30 litre cartridge | Pale grey | 6110 | 4145579 |
0.30 litre cartridge | Grey | 6120 | 4145587 |
0.30 litre cartridge | Black grey | 6130 | 1270772 |
0.30 litre cartridge | Graphite | 6150 | 4868972 |
0.30 litre cartridge | Steel grey |
6160 |
8929697 |
0.30 litre cartridge | Light beige | 6170 | 8929705 |
0.30 litre cartridge | Jura beige | 6175 | 1869382 |
0.30 litre cartridge | Anthracite grey | 6180 | 8929713 |
0.30 litre cartridge | Brilliant white | 6190 | 7619653 |
Precautions
|
Alfix A/S H.C. Ørsteds Vej 11-13 DK-6000 Kolding alfix.com 16 |
DOP No. 41 |
EN 15651-3 Alfix M-Silicon Sealant for facade for interior and exterior application and for joints |
Reaction to Fire (EN 13501) | NPD | Release of chemicals dangerous to the environment and health | See product safety sheet on www.alfix.com |
Conditioning: Method A (ISO 8340). Substrate: Glass without primer, aluminium without primer. | |||
Water tightness and air tightness | |||
Resistance to flow (ISO 7390) | ≤ 2 mm | Evaluation of the action of microorganisms (ISO 846) |
0 |
Loss of volume (ISO 10563) | ≤ 10% | Durability (EN 15651) | Pass |
Tensile properties at maintained extension after immersion in water (ISO 10590) |
No failure |
Tests
EN 15651
Alfix M-Silicon conforms to the rules of FDA CFR Section 21 177.2600 as well as EC No 1935/2004 concerning
materials and items that may come into indirect contact with food.
Technical data
- Working temperature
- +5°C - +40°C
- Density
- 1.33 kg/litre
- Formation of skin
- 10 – 30 minutes
- Cure time
- Approx. 1 mm/24 hours at min. 30% RH.
- Temperature resistance
- -40°C - +150°C
- Shore-A-hardness
- approx. 24 shore A
- Maximum movement
- +/- 25% of original joint width
- Shrinkage
- approx. 7%
- Shelf life
- Min. 12 months in unopened cartridges. Store cool.
Application
Particularly suitable for expansion joints in ceramic surfaces, sealing around pipe passages, and sanitary installations.
Excellent adhesion without priming to glass, ceramic tiles, marble, natural stone, enamel, metals, painted surfaces, and varnished wood.
Final appearance
Surface
The joint should be smooth with an even surface, free from holes or lines. Avoid inappropriate working or late smoothing, as this may leave noticeable lines or holes.
Design
The joints should be filled to a depth suitable for the tiles and their intended use. Shape the joint so it is not any deeper than the tiles to prevent water from accumulating on the surface. Shape joints along vertical boundaries with a run-off away from the vertical surface.
Strength
After curing, the joint should be solid with secure adhesion to the tile edges. The joint cures on contact with ambient humidity; applying a little water when smoothing will accelerate membrane formation. Excessive water will disrupt curing. Moist surfaces will prevent adhesion. For maximum elasticity, join two edges only. That is why a backstop or tape should be used at the base. To check tile edge adhesion, carefully probe the middle of the joint with a blunt, approximately 50 mm long instrument.
Colour
All joints will change colour over an extended period – no joint will be the same colour after years of use as it was at first.
Colour fading or discoloration of silicone joints triggered by chemical interactions with cleaning agents or their vapours, off-gassing from paint or wood furniture or similar are not covered by the warranty.
Colours
Available in colours to match cement-based Alfix grout range: brilliant white, grey, pale grey, steel grey, graphite, anthracite, black grey, light beige and jura beige. Colour swatches available on request.
Characteristics
Due to neutral curing, Alfix M-Silicon will not cause any colour alteration of acid-sensitive materials, such as natural stone and hence, the product is very suitable for marble, granite, travertine, etc.
Also ideal for sealing facades with ceramic tiles as the product does not attract dirt.
Alfix M-Silicone retains elasticity and produces a long life weather- and waterproof joint resistant to mildew (sanitary type).
Application
Surface preparation
General information: Bonding surfaces must be dry and clean. Vacuum and degrease the area with acetone or methylated spirits.
Bare metal and plastic should be sanded (keyed).
For tiled surfaces, joints must be free of sealant and caulk through to the underlying surface. Bonding surfaces must be the full thickness of the tile. Backstop deeper joints with plastic foam (semicircular strips) or similar to the lower edge of the tile so that
the depth at the middle of the joint is approximately half the width of the joint. The edges must be exposed.
How to use
Use masking tape to protect tiles.
Fill joints completely using appropriate gun. Finish off within 15 minutes by smoothing using a damp tool, such as smoothing kit or joint nail.
Remove any masking tape immediately after smoothing.
Cleaning
Uncured sealant: Acetone
Cured sealant: mechanical
Downloads