- For ceramic tiles and marble
- Suitable for tile formats up to 200 x 200 mm
- Suitable for insulating plates
- For interior use on floor and wall
- Flexible and water resistant
- Easy and smooth consistency
- Bed thicknesses up to 3 mm
Products
-
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix less dustFlexible dust reduced tile adhesive - Light
-
LetFixFlexible tile adhesive - Light
-
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
Montagelim1-component all-round mounting adhesive
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
ReadyFlex
Product information
Product
White, ready-to-use paste based on polymer dispersion.
Coverage
Packaging
Available in 4 kg and 15 kg plastic buckets.
Precautions
Alfix A/S H.C. Oersteds Vej 11-13 DK-6000 Kolding alfix.com 04 |
Declaration of performance No. 14 |
EN 12004:2007+A1:2012 Alfix ReadyFlex Dispersionsbaseret fliseklæber med forbedret vedhæftning, og åbentid. Indendørs anvendelse. |
|
Reaction to fire | NPD | Farlige stoffer | Se sikkerhedsdatablad på www.alfix.com |
Bond strength: Initial tensile adhesion strength |
≥ 1,0 N/mm² | Vedhæftningsstyrke efter varmelagring (EN1324:2007) | ≥ 1,0 N/mm² |
Durability, tensile adhesion strength after water immersion |
≥ 0,5 N/mm² | Vedhæftningsstyrke efter lagring ved øget temperatur (EN1324:2007) | ≥ 1,0 N/mm² |
Tests
DS/EN 12004
Technical data
- Working temperature
- +10°C - +30°C
- Density
- 1.6 kg/litre
- Open time
- approx. 30 minutes
- Foot traffic/grouting
- 24 – 48 hours at +20°C
- Full strength
- 28 days at +20°C
- Tensile adhesion strength concrete
- 1.6 – 2.5 N/mm²
- Tensile adhesion strength paper-faced plaster boards
- 0.2 – 0.4 N/mm² (failure in the substrate)
- Tensile adhesion strength timber boards
- 0.6 N/mm² (failure in the substrate)
- Classification -DS/EN 12004
- D2 E
- Shelf life
- Min. 12 months in unopened container. Free from frost.
Application
Surfaces
Cement/sand rendering, brickwork, concrete and aerated concrete. Paper-faced plaster boards, fibre-reinforced plaster boards. Timber boards in dry locations.
Surface preparation
The surface should be dimensionally stable, sound, and clean. Free from laitance, grease, and dust. There should be no blooms or crack formations. Residues from grease or soap can be removed with Alfix Deep Cleaner.
On absorbent surfaces apply Alfix Primer (Sealing Primer) or Alfix PlaneMixPrimer.
How to use
Apply Alfix ReadyFlex to the surface with a notched trowel, using the straight edge to spread out adhesive and subsequently the notched edge to produce a ribbed bed.
Fix tiles within 15 - 20 minutes by pressing them firmly into position in the wet adhesive with a slight twisting action. Ensure complete adhesive coverage!
When fixing marble, apply a thin contact layer to the back of the tiles before pressing them into the adhesive.
NB!
When used on dense surfaces or for non-absorbent tiles, setting time is extended.
Either surface or tile should be absorbent to ensure proper curing.
Switch off any underfloor heating.
Cleaning
Clean adhesive residues from tools and tiles with water before the adhesive sets. Once set, the paste can be removed mechanically or with solvent.
Downloads