- Suitable for locations requiring finished floor surface ready
- For straightening and levelling of substrates
- For balconies, car washes and industrial floors
- for locations exposed to upcoming moisture
- For interior and exterior use
- Foot traffic after 3 hours
- Water and frost resistant
- For slope building
- Suitable for underfloor heating
- Thickness: 2 - 25 mm
Products
-
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix less dustFlexible dust reduced tile adhesive - Light
-
LetFixFlexible tile adhesive - Light
-
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
Montagelim1-component all-round mounting adhesive
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
PlaneMix 25 exterior
Product information
Product
Grey, fast-setting, polymer modified powder on the basis of aluminous cement.
Coverage
Approx. 1.7 kg per m² /mm thickness.
Packaging
Available in 20 kg PE lined paper bags.
Flooring
Prior to further installation, make sure that the relative humidity on location corresponds to the floor covering in question. Curing rate is influenced by temperature, humidity, ventilation, as well as sub-floor construction.
Tiling: 24 hours at +20°C
Tanking and tiling: Allow min. 48 hours at +20°C.
Precautions
Alfix A/S H.C. Oersteds Vej 11-13 DK-6000 Kolding alfix.com 14 |
Declaration of performance No. 30 |
DS/EN 13813 CT-C30-F7
Alfix PlaneMix 25 |
|
Reaction to fire | A2fl-s1 | Release of corrosive substances |
CT |
Water permeability | NPD | Water vapour permeability | NPD |
Compressive strength | C30 | Flexural strength | F7 |
Wear resistance | NPD | Sound insulation | NPD |
Sound absorption | NPD | Thermal resistance | NPD |
Chemical resistance | NPD |
Tests
IRRITANT
Technical data
- Working temperature
- +10°C - +25°C
- Density
- 2.1 kg/litre (mixed with water)
- Flow EN 12706
- Approx. 115-125 mm
- Working time
- 20 - 40 minutes at +20°C
- Foot traffic
- After 3 hours at +20°C
- Floor covering
- After 24 hours at +20°C
- Full strength
- After 7 days at +20°C
- Compression strength
- 25 - 35 N/mm²
- Bending tensile strength
- 6 - 9 N/mm²
- Shelf life
- Min. 12 months when stored unopened in cool, dry conditions
Application
Surfaces
Concrete subfloors, max humidity 95% RH. Cohesive strength should be min. 1 N/mm².
Ceramic tiles, terrazzo.
For further information and details, please contact our Technical Services Dept.
Surface preparation
Exterior
The surface should be dimensionally stable, sound, clean and free from dust and laitance.
Further, substrate should be water and frost resistant.
Existing concrete floors should be sanded/cleaned prior to levelling.
Concrete floors should be primed with Alfix PlaneMixPrimer diluted 1:6 with water.
Dense surfaces require pretreatment with Alfix Expoxy Grunder, 2-component epoxide primer system,
added sand once applied.
Priming of other surfaces, please consult our Technical Services Dept.
Outdoor temperature should be min. +10°C while working.
Allow primer to dry before commencing further treatment, usually drying time is 1 hour at +20°C.
Application of levelling compound should be made within 24 hours after priming.
Use self-adhesive foam tape to retain at doors, around floor drains, etc. If possible prevent compound
from obtaining contact to walls. For thicknesses exceeding 5 mm, always apply self-adhesive foam tape
for walls.
Should levelling imply several layers, priming before each new application is required.
Interior
The surface should be dimensionally stable, sound, clean and free from dust and laitance. Residues from
grease or soap can be removed with Alfix Deep Cleaner. To remove laitance or roughen smooth surfaces,
use mechanical preparation, such as sanding or grinding, and vacuum subsequently.
Prime absorbent surfaces with Alfix PlaneMixPrimer.
Prime non-absorbent surfaces with Alfix UniversalPrimer. Alternatively, wash/brush the surface with a
mixture of Alfix PlaneMixPrimer and levelling powder in the ratio 1:2.
Ensure a room temperature of min. +10°C while working. Allow primer to dry before commencing further
treatment. Application of smoothing compound should be made within 24 hours after priming. Use self-adhesive
foam tape to retain at doors, around floor drains, etc. If possible prevent compound from obtaining
contact to walls. For thicknesses exceeding 5 mm, always apply self-adhesive foam tape for walls. Should
levelling imply several layers, priming before each new application is required.
How to use
Add 3,2 – 3,6 litres of clean cold water per 20 kg bag of powder.
Amount of water per bag*) | 3.6 litres | 3.4 litres | 3.2 litres |
Layer thickness in mm | 2 mm | 15 mm | 25 mm |
*)Recommended amount of water
Pour water into a clean container and sprinkle in powder while stirring continuously.
If possible, use large mixing container or drum for more bags at a time and mix until a lump-free, easy-flowing mix is obtained. Mixing time is approx. 2 minutes using rotary drill paddle.
Pour or pump Alfix PlaneMix 25 onto the prepared substrate and spread with notched or straight trowel until the compound flows together into a smooth and even surface.
For thicknesses exceeding 25 mm, incorporate kiln dried sand to extend coverage.
NB!
Additional water should not be added to levelling compound already starting to set.
Note that the temperature of mixing water will influence working time/pot life.
Over dosage of water will reduce strength and may produce laitance. Protect from draughts, direct sunlight,
and heat, especially during the first 3 days upon application. If possible cover up with foil or plastic
sheet.
Colour and appearance of finished levelling layer will be influenced by substrate moisture content and
weather conditions.
Close broken packaging carefully after use and use the rest within the shortest possible time.
Always complete with a finished floor surface, for example ceramic tiles.
Cleaning
Tools and tiles should be cleaned with water before the compound sets.
Cement-based products harden when mixed with water, hence do not pour surplus PlaneMix into the drain system.
Downloads