- For interior and exterior use
- Weathering resistent
- Highly water and dirt repellent
- Prevents algae and fungus growth
- Exellent coverage
- Water vapour permeable, class V1
- Up to 20 years of protection
- Suitable for painted surfaces
Products
-
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix less dustFlexible dust reduced tile adhesive - Light
-
LetFixFlexible tile adhesive - Light
-
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
Montagelim1-component all-round mounting adhesive
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
DuraDec 8000 SR
Product information
Product
Matt emulsion paint based on silicone resin.
Coverage
4-6 m²/liter for 2 coatings depending on substrate.
Packaging
9 liter plastic tubs.
Technical data
- Working temperature
- +5°C - +25°C and max 80% RF
- Density
- 1.5 kg/liter
- Gloss
- Matt finish
- VOC
- Max 40 g/liter (Cat. A/c).
- Water vapour diffusion
- Sd 0.07-0.10 m class V1
- Water permeability
- < 0.20 kg/m²x√h. class W2
- Drying time
- Touch dry, approx. 30 min.
- Recoating
- 2 hours at +20°C and 65% RF
- Storage life
- Min. 12 months in unopened container
Colours
Available in white as standard. On request, other colours are deliverable – mixed according to Alfix colour chart.
For application on insulation systems, use only colours with a Light Reflectance Value (LRV) of min. 20%.
Coverage
4-6 m²/liter for 2 coatings depending on substrate.
Application
Surfaces
Concrete, fully cured silicate and rendered facades, as well as painted surfaces.
For concrete and newly rendered facades, allow at least 12 months before any further treatment.
For further details, please contact our Service Technical Department.
Surface preparation
The surface should be clean, dry and structurally sound. If required, clean the surface using Alfix Deep Cleaner.
Facades of bricks or limestone should be frost resistant.
Any damages or defects should be repaired before painting. The surface should be free from moisture and efflorescence.
For absorbent surfaces, apply Alfix PlaneMixPrimer diluted with water 1:6.
How to use
Stir welle and apply Alfix DuraDec 8000 SR to the surface in 2 coatings using roller, brush or airless sprayer. Can be diluted with max. 20% water if suitable for the job.
Always carry out a small test to ensure compatibility of paint and substrate!
To avoid visible lines of colour differences, it is recommended to finish each wall in one ongoing work process.
Note!
Dark colours are particularly receptive to impacts caused by weather conditions during work as well as surface texture and suction. These on site conditions may result in variations in final appearance and colour differences. Hence, in case of dark and intense colours, it is of significant importance to ensure a uniform surface texture and suction. Prepare and organize the job in order to finish each wall in one
unbroken process and protect against climatic impacts during work and until completely dried.
Tinted facade paint
To ensure colour uniformity, tinted facade paint should preferably be of same production batch or be thoroughly mixed together before use. Tinted facade paint is non-returnable.
Exterior work with render should only take place in dry weather at temperatures between +5ºC and +25ºC - avoid direct sunlight.
If rainy weather or temperatures below +5ºC are forecast, cover facades.
Avoid exterior painting during the winter season.
Cleaning
Clean residues from tools with water and soap before the paint dries up.
Maintenance
In order to preserve the desired cosmetic appearance of the rendered and painted façade, the façade
surface must be checked for the presence of fouling growth at least every five years – or more often if
necessary.
To the same end, it is useful to check the general condition of the façade with regard to damage to the
paint, render, elastic joints, etc. for subsequent repair.
Downloads