Products

Fast-setting screeding mortar "Mix"
Self-levelling compound "Mix"
Tanking systems
Tile adhesives "Fix"
Binder / Primer
Tile grouts
Cleaning and maintenance
Smooth rendering and paints
Acoustic underlay
- Acoustic PS3 - Recycled
  
  Acoustic underlay

Frontpage Products Tanking systems Waterproofing membrane Pro

Waterproofing membrane Pro

Diffusion resistant polyethylene sheet

For waterproofing substrates under ceramic tile installations.

For interior use
Fast track installation
Fully covering reinforcement
High water vapour resistance
Crack bridging for critical substrates
Approved for wet rooms

Calculate

Retailers

Product information

Product

Waterproofing membrane with 1 layer of polyethylene waterproofing membrane and 2 layers of reinforced felt non-woven.
Thickness: approx. 0.50 mm
Width: 1 m.

Packaging

30 m per roll.

Flooring

For tile fixing, use Alfix LetFix, LetFix Universal, ProFix, or CombiQuickFix depending on substrate and tiles.

Precautions

1073

Alfix A/S
H. C. Ørsteds Vej 11-13
DK-6000 Kolding
alfix.com
14
1073-CPR-314-3
EAD 030436-00-0503

Alfix Waterproofing membrane Pro
ETA-11/0501
Declaration of performance
No. 22

Technical data

Elongation at break
- 200-300%
Drying time/foot traffic/tile fixing
- 4-6 hours at +20°C
Temperature resistance
- -5ºC - +70ºC

Application

Surfaces

Rendering, older than 2 days.
Concrete, 14 days, max. 90% RH.
Lightweight concrete, max. moisture content 8%.
Aerated concrete.
Screed, min. 7 days.
Existing tiles and terrazzo.
Plywood, moisture content 7-12%. Only floors.
Gypsum plaster, wet room plasterboards, fibre-reinforced plasterboards, calcium silicate boards and Glasroc Hydro.
Cement-based boards such as Aquapanel, Powerpanel H2O, Hydropanel, Ivarit UniCo, Internit VR.
Polystyrene boards with fibre-reinforced cement surfaces such as Wediboard, Jackoboard and Luxplader.

Surface preparation

The surface must be dimensionally stable and free from dust, grease and laitance as well as blooms and form oil residues. Remove grease and soap residues with Alfix Deep Cleaner.
Prime highly absorbent substrates with Alfix Primer or Alfix PlaneMixPrimer diluted from 1:6 - 1:20 with water. Room temperature should not be below +10ºC. The primer must be dry before further application.

How to use

Apply Alfix 2K Sealing membrane to the substrate in a layer of approx. 0.5 kg/m² ensuring full coverage. Use a roller, brush or a trowel for the work. Immediately after, press the Alfix Waterproofing membrane Pro onto the moist sealing membrane, ensuring full contact with the substrate without air pockets - make 50-100 mm overlap between sheets. When joining
more membranes, it is important that they do not overlap. Cut any overlaps to ensure that there is only a single waterproofing membrane layer.

Film

Guidance

See how to use Alfix products for your construction projects.

See guides

Downloads